How to convert water softeners Hard to Soft?

!±8± How to convert water softeners Hard to Soft?

Work to convert the softening hard water in fresh water. Hard water contains minerals such as calcium and magnesium, which are positively charged ions are charged. The presence of positive ions, which causes calcium and magnesium, less easily soluble in water. Consequently, the high concentration of minerals, water taste "salty", though did not have sodium.

Water softeners are not only working to remove the excess calcium and magnesium, but also iron, lead, to remove radioCopper and sediment.

The basic principle is that work on the ion exchange water softener. All have a water softener resin containing ion exchange brine tank and head control, the mechanism to be held in the regeneration will be determined.

Resin beads in the tank of resin, the sites that keep the sodium or potassium ions. The positively charged ions are attracted to the exchange of hard water the beads and the sodium orPotassium ions. The process continues until there are no other sites for the exchange takes place and will be exhausted and the resin must be "regenerated". During this process, the solution of sodium or potassium, the resin rinsed decided to leave the calcium / magnesium and other minerals from hard water to meet and disposed in the exhaust.

Many of dietary salt intake in their concerns, if the sodium in exchange for water softening are bad, they areImpact on their health.

The definition of the FDA for sodium in drinking water: sodium-free up to 28 = very low = 28 mg to 197 mg of sodium and low sodium = 197-789 mg.

The amount of sodium in water is replaced by a water softener as a track and will not be detrimental to all, limit intake of sodium.

10 grains per liter of hard water ions will be changed in the 78 mgl mg sodium, 15 grains for the 119 mg sodium and 20 grains per 158Sodium.

Potassium chloride salt subsitute is also widespread, but a bit 'more expensive than sodium.

You may have heard the term capacity of wheat, a water softener and if you ask me what it means and how to calculate them.

= The capacity of grain softener removes the hardness before it needs regeneration.

1.0 cubit feet of resin = 30,000 grain capacity

1.5 cubit feet of resin = 45,000 grain capacity

2.0 cubit feet of resin =60 000 Grain Capacity

Depending on the consumption of water every day of your family and how hard the water is determined, the grain required capacity. It is proposed to purchase a water softener with the ability of wheat to allow the regeneration of not less than 3 days away.